Rolex Watch Repair: Your Complete Guide To Servicing | Denver, CO

When it comes down to Rolex watches, servicing and maintaining them is far different than other brands. This article will show you how a typical Rolex is serviced and maintained. Keep in mind. Every Rolex service process varies by model and year.

Before you send your Rolex out to be serviced in Denver, CO, you must know some of the basic parts. This will ensure that your watchmaker has all the necessary tools and parts for a proper Rolex watch repair.

Case Back

The case back screws onto the middle part of the watch, known as the “cushion”. The case back protects the inner workings of the watch. It is possible to see into the movement via a small crystal in the 6 o’clock region (this is where you will find the serial number).


The crystal protects your dial and hands from any external damage or debris. Crystals can be either plastic or sapphire, and on some models, Rolex will apply a coating called “cyclops,” which is a magnification lens that enlarges the date window by 2.5x.


The bezel refers to the ring that surrounds the crystal and typically has engraved numerals on it to mark minutes. It is rotated to measure elapsed time.


The movement is the heart and soul of your Rolex watch. It is responsible for keeping time and must be kept in good condition if your watch keeps accurate time.

Now that you have a basic understanding of the parts of your Rolex let’s take a look at the typical Rolex watch repair process.

The first step is to remove the case back and inspect the cushion for any damage or foreign objects. If there are any issues, they will be repaired or replaced.

The next step in Rolex watch repair is to clean all parts with a gentle brush and then lubricate them using very light oil. This will ensure that your watch runs smoothly for years to come.

The movement is then cleaned and inspected for any damage or wear. If any parts are damaged or need to be replaced, they will be.

After the movement is serviced, it is reassembled and lubricated. The case back and crystal are then replaced, and the watch is tested for accuracy.

If you have a Rolex with a metal bracelet, it will also be polished during the service process.

So, there you have it! Your basic guide to watch repair.

What Is the Average Rolex Movement Time?

You may be wondering how long a Rolex movement will last. In general, a Rolex movement should last 10-15 years before it needs to be serviced. However, this varies depending on the model and how often it is worn.

If you want to ensure that your watch keeps accurate time, it is important to regularly schedule a Rolex watch repair. A good rule of thumb is to have it serviced every five years or sooner if you notice that it is not keeping time as accurately as it used to.

Also, keep in mind that if you wear your Rolex every day, the movement will need to be serviced more often than someone who only wears it occasionally. This is because a watch is worn daily experiences more stress.

Rolex Service Costs

The typical cost for Rolex watch repair in Denver, CO, varies depending on the model and age of the watch. However, it typically ranges from $1,100- $3,000 before tax.

For most people, this is very expensive and not an easily absorbed expense. To ensure your Rolex continues to look great and remain valuable over time, consider purchasing an extended warranty plan through Asurion.

An extended warranty plan will ensure that your Rolex is repaired or replaced at no additional cost if it needs service within the coverage period.

What Time Does It Take To Build And Put Together A Rolex Movement?

You may be wondering how long it takes Rolex watch repair specialists to build and put together a movement. As of 2013, Rolex has produced over 800,000 movements with no measurable defects!

Rolex builds each watch by hand using the finest materials available. The parts are then cleaned several times before being assembled into the final product. A Rolex movement is calibrated for accuracy on the testing equipment seen below:

Additionally, Rolex movements are not lubricated when they leave the factory (standard practice). This ensures that none of their watches will experience any problems due to an out-of-the-box malfunction.

Lastly, all of the parts inside your Rolex are manufactured in-house, which means they can control quality without relying on subcontractors.

In conclusion, building a Rolex movement takes a lot of time and effort. This is why they are known for their quality and accuracy. And, thanks to the factory- calibration and lack of subcontracting, you can be sure that your Rolex movement will last for many years to come.

What Is The Average Service Time For A Rolex Watch?

As we mentioned earlier, the movement should last 10-15 years before needing Rolex watch repair. However, this varies depending on the model and how often it is worn.

If you want to ensure that your watch keeps accurate time, it is important to have it serviced regularly. A good rule of thumb is to have it serviced every five years or sooner if you notice that it is not keeping time as accurately as it used to.

Contact Matheu’s Fine Watches a & Jewelry for Rolex Watch Repair in Denver, CO

At Matheu’s Fine Watches & Jewelry, you can feel confident that skilled watchmakers will service your Rolex. We are an authorized dealer, and our team of experts has over 100 years of combined experience in servicing luxury watches. Get in touch with us today for all of your Rolex watch repair and service needs.

Photo by Rudenkois at Shutterstock