If you are a new Rolex watch owner, then you are probably thinking more about what everyone you know is going to say when they see the flashy new watch on your wrist than anything else. However, you should also take a minute to think about what types of indications your new watch may give if there is trouble down the road. Your watch might give a few warning signs that you can easily miss if you aren’t paying attention which will shorten its lifespan. After the investment that you just made in your new watch, you want to keep up with watch repair in Littleton, CO so you don’t need to think about a new investment anytime soon.
In general, there are two things that you need to be aware of, how often you need to go get your watch repaired and how often to book a service visit. Many people do not realize that Rolex watches need regular service at planned intervals in order to make sure that they continue to run smoothly. The service schedule can vary depending on the type of watch that you have, which is why it is very important that you check your owner’s manual and take a look at how often your repair and service should take place.
During repair and service, a trained watch professional will carefully take apart the entire case behind your timepiece. They will then individually check each component for damage or any signs of rust and replace anything that might look iffy. All rust, dust, and any damaged components can threaten the rest of your watch since these things can spread within one small watch easily. The best way to prevent the spread is by acting proactively, which is what the watch service is designed to do.
While they’re checking out the area behind your watch, they will also lubricate each tiny part so that it works better with less friction. The result of this is usually less damage and fewer problems over time because lubrication is the key to keeping any item with moving mechanisms working smoothly. There’s a special type of lubrication oil that needs to be used within a Rolex watch, so you want to make sure that you have a professional handle this task so that you don’t cause any damage to your watch that would force you to later seek out a repair service in Littleton, CO. It is usually recommended that you have your watch service every five years but remember to check your manufacturer’s guide in case there’s any small discrepancy.
While regular service is one of the best ways to keep your watch operating smoothly, it is not the only way. Despite your best efforts to keep up with your service appointments, there are things that can go wrong with your watch outside of normal service times. At the end of the day, your watch is just a fancy piece of machinery and that means that things can and will go wrong from time to time. Therefore, it is highly important that you know the signs to look for that indicate you may need watch repair. Staying ahead of any potential damages and booking an appointment for repair service in Littleton, CO is the best way to protect your watch and your investment.
The following is a quick look at some of the biggest signs that it may be time for a watch repair. Keep in mind that this is not a full list, but if you notice any of the problems on this list it is a sign that you need to call and have your watch evaluated by a professional. If you see any of the situations that are noted on this brief list, time is of the essence if you want to prevent further damage from occurring. The best way to take care of your watch is to keep up with watch repair so that you can body and brightly wear a watch that is always on time.
Moisture Behind the Case
The first thing you always have to watch for is moisture behind your watch case. It only takes a small amount of moisture to cause a large amount of rust and damage within your watch. If you notice any type of mist or any signs that moisture may have infiltrated your watch you need to act quickly. You should not attempt to take the case off on your own as you can damage the inside, but instead, you should head to a watch repair shop for help.
Skipping Second Hand
The second thing you should watch out for is a second hand that is skipping. A skipping second hand is a sign that your watch is starting to slow down and that there is a mechanism inside that is preventing your watch from working the way that it should. You can fix this problem if you head to a watch repair shop. You don’t want to ignore it because eventually, you will start to lose time and end up running perpetually late.
Sand in Your Watch
Where there is sand, there is moisture, which can cause a great deal of rust in a small amount of time. If you have been to the beach and notice that there is sand behind your watch case, you need to head to a watch repair shop to have your watch cleaned and ensure that the case is sealed and waterproofed again once this process is complete. It is always a good idea to wash your watch after exposure to sand, but sometimes a little extra help is needed.
If you have noticed any of these signs and need watch repair in Littleton, CO, or want to book a service, then call Matheu’s Fine Watches & Jewelry, and we will get you set up.
