Reasons You May Need a Watch Repair in Parker, CO

A wristwatch may be a necessity, but it is also a fashion statement. If you are a proud owner of a fine wristwatch, be sure to keep it in good condition. In doing this, it will continue to functions for years and years.

Before we begin to examine the common mistakes made by watch owners, we would like to point out that all of these are preventable. If you end up visiting a watch repair in Parker, CO, it is probably due to your own lack of awareness. Now let’s briefly walkthrough the most common mistakes made by newbies:

 

1.  Water Damage

The modern timepieces are by-default waterproof, but the older versions and vintage watches are still vulnerable to water. Even waterproof watches can be damaged by water, it all depends on its extent of vulnerability.

Other than that, hot springs, high steam sauna, Jacuzzis can harm the metals of a watch as they tend to contract when they come in contact with hot water.

If your watch is accidentally infiltrated by water, you need to look for a reputable repair service. Look for watch repair in Parker, CO, that has high service standards and puts immense emphasis on its customer service.

 

2.  Setting the Date

This is a mistake commonly made by newbies. Changing the date at certain times can damage the internal mechanism of a watch. For the uninitiated, altering dates between the hours of 10pm to 2pm is inadvisable since a watch is setting the date by itself. It can result in damage to your watch. However, it is more of an issue observed among older versions and vintage watches in comparison to modern ones.

If you are unsure or rather hesitant about setting the time of your watch, it is better to get it done by an expert of watch repair in Parker, CO. While you are at it, you should also inquire him about the preliminary precautions to take.

 

3.  Continuously Winding the Watch

Mechanical timepieces require winding, and many watch enthusiasts may not realize that they are over winding a watch. Excessive winding can damage a watch inadvertently. This issue is more prevalent in the vintage and older mechanical models as opposed to modern timepieces that have an inbuilt tool to counter over winding. The previous watch did not have this fail-safe mechanism.

If you are worried about over-winding your watch and running into costly repairs, it is suggested that you learn it from a local watch repair in Parker, CO, and then do it yourself.

 

4.  Exposure to Magnets

On the face of it, magnets may outwardly seem innocuous, but unbeknownst to you, they can certainly damage your watch if you are not careful enough. This is why you should steer clear of magnets if your watch is your prized possession. A vintage watch when in close quarters with smartphones, laptops and electronic devices, fails to function properly as its hairspring/mainspring messes up.

While doing a routine check-up from your trusted watch repair in Parker, CO, you should inquire about the hazards that magnets can create for your watch. Hopefully, it will prevent any unforeseen damage.

 

5.  Pressing Chronograph Pushers Underwater

You may wonder who on earth may operate their chronograph underwater, but it is not unheard of. Ultimately, your watch suffers damage. Given that most modern timepieces available in the market today are impermeable, but only a handful of those have waterproof pushers. The last line of defense is the seal which when broken, leads to costly damages. The internal components of a watch are mostly composed of metal, and they corrode/rust fast. Other than that, the hands and dials can quickly become discolored and rusted. You can prevent it by simply avoiding pushing the chronograph underwater. Water damage can result in one of the priciest as well as time consuming repairs.

While looking for a watch repair in Parker, CO, it is highly advised that you look for a service that has prior experience in dealing with water-damaged watches and skillfully repairing them to perfection.

 

6.  Pushing Recessed Pushers Improperly

Recessed pushers are quite uncommon. Just like a chronograph pusher, they also perform a function. They are used to set complicated settings (leap year, month, date, day or moon phase) in a watch. A stylus is required to operate it properly. It should be fully pressed first and then allowed to make its way back again. In case the recessed pusher is not fully pressed, it could create a misalignment in gears or some other complication. It is always advised to press the recessed pusher hard and allow it to come back by itself.

When in need of a quality watch repair in Parker, CO, look for experienced and certified repairing service that has a state-wide or better yet, nationwide presence. This ensures reliance and a peace of mind on your part.

 

7.  Replacing the Battery

The batteries of wrist watch commonly have one or two battery cells. These batteries can power up the watch for a limited amount of time. When you replace the existing battery with a new one, you should opt for manufacturer’s recommended one.

 

Due to this reason, before you get your battery replaced by a watch repair in Parker, CO, be sure of the type and brand of battery is usually used in your watch. If you are unsure, then inquire if the watch repairing service has prior experience with your brand.

 

Conclusion

In short, when you invest your hard-earned money to purchase a watch that you truly love, the last thing you want is shelling out redundant money to have it repaired. All you need to do is read the instruction manual or probably inquire the salesperson about the necessary precautionary measures that you need to take in order to ensure the durability of your watch.

 

Always opt for professional experts of watch repair in Parker, CO, who can greatly help you in resolving your timepiece issues faultlessly.

 

About Matheu’s Fine Watches & Jewelry

Matheu’s Fine Watches & Jewelry has been providing quality products and professional services to the metropolitan Denver, CO area since 1951. The very first watch repair and service facility ever opened in Colorado. Dan Matheu, watchmaker, pioneered watch repair and services in Colorado. Today, Scott Matheu is at the helm steering Matheu’s Fine Watches & Jewelry. With his vision, Scott opened a watch store in Highland Ranch and has made Matheu’s Fine Watches & Jewelry not only one of the largest watch stores to provide watch repair in CITY but also the entire state.

 

Whether you need watch repair in CITY, watch engraving, or even if you have an antique watch that you would like appraised, you can count on Matheu’s Fine Watches & Jewelry to provide you with superior service each and every single time. All of our watchmakers are factory trained and we have CW21 Certified by the American Watchmakers and Clockmakers Institute (AWCI) on site. This certification has the most stringent standards for watchmakers performing repair, restoration, and service work on watches. With one of the largest service centers in the metropolitan Denver, CO we are not only able to provide watch repair in CITY but to the entire 50 states as well.

 

Matheu’s Fine Watches & Jewelry is also a factory authorized service center for Cartier, Tag Heuer, Philip Stein, Swiss Army and many more brands. When you use Matheu’s Fine Watches & Jewelry for your watch repair in CITY, you can rest assured knowing that you will receive our (2) two-year warranty on major watch repairs that we provide. If you are looking for the best watch repair service center throughout the United States, you cannot go wrong when you choose Matheu’s Fine Watches & Jewelry. With certifications from not only AWCI but SAWTA too, we not only stand out from the pact; we lead it.

 

comprehensive-guide-to-finding-watch-repair-in-highlands-ranch-cowhen-would-you-need-watch-repair-in-littleton-co-